LED tube, T8, 60 cm, 1100lm replaces 18W, G13, matt, cool white
00232643
energy-efficient, long-lasting LED fluorescent tube in matt and cool white with a power consumption of 10 watts as a replacement for a conventional fluorescent tube
Darmowa przesyłka od 100,00 zł
30 dni na zwrot
Elastyczne i bezpieczne płatności
Bezpłatna wysyłka zwrotna
Highlights
Zintegrowana folia ochronna
Dla większego bezpieczeństwa w przypadku uszkodzenia: zintegrowana folia ochronna tuby LED zmniejsza ryzyko spadających odłamków szkła
Jakość według niemieckich standardów
Od pierwszych próbek produkcyjnych aż po gotowość do produkcji seryjnej: Nasze produkty przechodzą surowe i kompleksowe kontrole jakości, które są planowanie i przeprowadzane w Niemczech. Tym sposobem gwarantujemy przestrzeganie wszelkich wytycznych, dyrektyw oraz norm – i spełniamy przy tym najwyższe wymagania.
Dane techniczne
| Wygląd (kolor, design, motyw, seria) | |
|---|---|
| Indeks kolorów | 80.0000 |
| Światła kolorowe | Zimna biel |
| Wymiary i waga | |
|---|---|
| Wysokość | 604 mm |
| Właściwości fizyczne | |
|---|---|
| Budowa | T8 Tube |
| Możliwość sciemnienia | Nie |
| Temp. barwowa | 6500 |
| Stopień ochrony IP | IP20 (Dry Rooms) |
| Gniazdo lampy | G 13 |
Wiecej informacji o produkcie
- energy-efficient, long-lasting LED fluorescent tube in matt and cool white with a power consumption of 10 watts as a replacement for a conventional fluorescent tube
- daylight white light for constant, maximum brightness and concentration
- easy exchange of fluorescent tubes, which are operated in lamp housing using starters and a conventional AC-adapter (CLB and LLB)
- No conversion of lights required - the supplied dummy starter must, however, be exchanged with the existing starter
- reliable colour reproduction for everyday applications
- frosted cover for even, glare-free light distribution
- broad beam angle for the even illumination of larger areas
- LED tube for use as office and work lighting, in garages and workshops, etc.
- 100% brightness immediately after switch-on without warm-up time or flickering
Zawartość opakowania
- 1 LED tube
- 1 starter
- 1 operating manual
Wskazówki dla użytkownika
Only for private use, not for long-term commercial use.
Only for use in individual switching (lights have their own starter for each fluorescent tube).
Not suitable for electronic ballasts (lights without starters).
CLB = Conventional Loss Ballast, the most widespread system
LLB = Low Loss Ballast
EB = Electronic Ballast
Any changes to the wiring should only be carried out by qualified electricians. Incorrect installation could result in injury or damage to property.
Before carrying out any conversion work, ensure that there is no voltage.
Any defects due to incorrect installation are not covered by the warranty.
In addition to the power consumption of the LED tubes, CLBs that have not been disconnected/bypassed in particular have a high and unnecessary power loss and can cause high voltage peaks in some cases. Voltage peaks reduce the service life of the tubes. The disconnection/bypass must only be carried out by a qualified electrician.
Power loss in LLBs is considerably lower and so disconnection/bypass is not so important.
If a light that has been converted to LED tubes is fitted with fluorescent tubes once again, a fluorescent tube starter will need to be refitted. Every light that has been converted to LED tubes should feature a warning notice next to the starter.
The overall efficiency and light distribution is determined not just by the characteristics of the LED tubes, but also by the construction and characteristics of the lights.
Informacje o producencie
| Nazwa producenta | Hama GmbH & Co KG |
| Adres pocztowy | 86652 Monheim |
| Strona internetowa producenta | https://hama.com |
Wsparcie
Masz pytania dotyczące produktu? Tutaj znajdziesz wszystko, czego potrzebujesz:
Napisz własną recenzję